Dye Penetrant Chemicals
Manufactured using high grade raw material, our Dye Penetrant Chemicals are used for a variety of purposes in different industries. Procured from reliable sources and conforming to various industrial international standards, our Industrial Dye Penetrant Chemicals are only supplied after being tested on various parameters.
Availability as per the desired specification at industry leading prices and assuring accurate purity, we are well reckoned as one of the overriding Auto Dye Penetrant Chemicals Exporters based in India.
Applications :
For on-site use in petrochemical plants, pipe lines, flanges, tools & gauges, machined components, heavy chemical industries, oil & gas refineries, chemical pharmaceutical & pesticides manufacturing plants, etc.
For all kinds of mild steel & stainless steel fabrication & equipments viz, pressure vessels, reactors, condensors, heat exchangers, filters, stirrers, bridges and heavy structural fabrications, sugar, food & confectionery plants.
Wet Application - Fluorescent
Oil Based: 135A/J-1, 131A/L-1, 134A/P-4
Water based: 135C/L-2, 134C/P-7, 135C/P-5
Wet Application - Non-fluorescent
Oil Based: 140A/P-7, 147A/J-5, 146A/J-5
Water Based: 140C/P-7, 146C/L-3
Dry Application
Red – 246
Black – 247
Grey – 249
Penetrant :
Visible Solvent Washable FC911 Fluorescent Solvent Washable FC921
Visible Water Washable FC931 Fluorescent Water Washable FC941
Developer :
Solvent Suspendible FC811(for visible) Solvent Suspendible FC821(for Fluorescent)
Dry Developer Powder FC822
Remover :
Solvent Remover FC711 (for visible)
Solvent Remover FC721 (for Fluorescent) Emulsifier (Hydrophilic) FC722
Emulsifier (Lipophilic) FC723
Packing :
Available in 420ml Aerosol Can
Bulk in 1 ltr., 5 ltr & 20 ltr.
Meet the requirements of :
Boiler & Pressure Vessel Code Section V, Article 6
ASTM E-165
Contaminants :
Sulphur Contents – Less than 1% by weight
Halogen Contents – Less than 1% by weight
Penetrant Flash Point – Greater than 93° C
Normal Working Temperature Range - 5 ° C to 52° C
Suitability – Suitable for MS, Nickel base alloys, Austenitic Stainless Steel, and Titanium.
Additional Characteristics :
| Properties |
Penetrant FC 911/2 |
Developer FC 811/2 |
Remover FC 711/2 |
| Viscosity: |
< 3 CSt |
N.A. |
N.A |
| Sulphur Contents: |
< 500 ppm |
< 500 ppm |
< 500 ppm |
| Chlorine Contents: |
< 25 ppm |
< 25 ppm |
< 25 ppm |
| Colour: |
Deep Red |
White |
Colourless |
| Sensitivity on 20 µ Ni-Cr Panel: |
Good |
N.A |
N.A |
| Area Coverage: |
30 Sq. m |
22 Sq. m |
N.A |
OUR PRODUCTS